End 2 End Technologies

If a customer would like to change the hostname of their PulseNET server, they simply need to ensure that the PulseNET service is stopped, make...

PulseNET does not issue a heartbeat in the network. PN only broadcasts on the network to do a poll. The closest thing PN has to a heartbeat is an ICMP ...

Q: If a ‘remote’ SD radio fails between polls or is ‘bouncing’ between polls – does PNE get a view of this activity? A: No.  PulseNET only gets inf...

DLINK settings : 1. Under the DLINK settings does TCP need to be enabled for the reporting to work back to Pulsenet ? PulseNET can use eithe...

The PulseNET Installation Guide includes: • Installation prerequisites, system recommendations, and planning guidelines • Inst...

When a radio is taken out of service and replaced with a new radio (i.e. the old radio has failed) the PulseNET license is "lost," since each li...

For Dlink devices, the initial discovery of the Master is only done via ACTIVE request. However, either active or passive polling can be used...

Attached

PulseNET: PulseNET Enterprise:

As of version 3.2 of PulseNET and PulseNET Enterprise, we allow the debug mode to be turned on through the Administration > Support menu. This is used ...